Guide to Installing Outer LCD displays

V3 Users Only, sorry V3c, will test tho
Creators: Mark and HEATpitcher27 a.k.a. Kyle

[=12]By using P2K Phone File Manager to replace the "cl.gif", it'll change the outer LCD's image when the phone is open. The image should be 96 pixels wide by 80 pixels high. I've heard of newer V3s having a cl.gif where one of the dimensions is off by one pixel. If this is your case I would try experimenting with the size in an image editing program. One important thing to note is that the file has to be named "cl.gif" (small letters, that's not an "eye" or a "one" it's a lower case "L" - cl.gif). GSM quadband

Launch P2K Phone File Manager, then navigate to "/a/mobile/system/" and you'll see a "cl.gif" file.

It's best if you first delete the old file, then upload the new one. Replace the old "cl.gif" with the new one by going to the "Files" area and clicking on "PC >>> Phone" and selecting the new "cl.gif".

This is where you load the phone file list at, transfer files between the V3 and the computer and how you delete files from the V3.

When you upload the new cl.gif, and click "Update list", notice that the attribute has been reset to "70000".

Sorry V3c Users I dont know if this will work for you, but i will test for you, V3 User only tutorial
Fix this so the attribute is "70044" again. Do this by entering "68" in the "Attributes" box and then click on "cl.gif" in the "File" window, then press the "Change" button back in the attributes area.

Now click "Restart". This is the easiest modification there is. Should take you two minutes tops. Common mistakes are naming the file in capital letters, or appending a second .gif to the name like cl.gif.gif.

Some people are required to perform a seem edit to make this work. I've never run across this issue so I can't document it. It's never been the case for the dozens of V3s I've modified.