How it works

1. In radiocomm you need to select the main pulldown menu, select MA >CDMA1X >6500 chipset Base.
2. then in the settings pull down menu, select USB>M-Link USB Driver
3. in the main RadioComm window, click on the P2K1 tab

The computer should then "beep", and you should see the radio detection change from a blue circle to a green circle. just below the middle of this window and to the right you should see the options to master clear and master reset.

If i were you i would not mess with any of the other settings you may see on this window unless you want a brick atleast not b4 you do some serious research into what this program is capable of and what each option does.