Seem Edit List

This list is primarily for Verizon RAZR's (v3c / v3m) but some of the main seem edits appear to be the same for Sprint razr's and a few other carriers like enable usb transfer and MPT subsidy code.

If a seem edit does not list the RECORD that needs to be changed, assume that it is intended to be set to 1


Requirements for doing a seem edit:
* USB drivers installed ^[GUIDE]
* PST 7.2.3 - Phone Programmer ^{[download unavailable]}
    PST 7.2.5 can be used instead [DOWNLOAD]
* P2K Seem Editer ^{[GUIDE] [DOWNLOAD]}


RELATED: How to perform a seem edit

Enables USB Transfers   pictures/ringtones/video/etc			WORKS
2742	Bytes: 0000	Offset 6a	check bit 0 // check bit 1
If you want to use any P2K program or Mobile Phone Tools you first need to perform this seem edit to enable USB transfers between your phone and your computer. Required for V3C and V3M

Enable MultiMedia Studio (MMS) in MPT 4+			WORKS
2827	Bytes: 0000	Offset 0006	check bits 0 - 2 - 3 - 6
This seem edit makes it so that MPT gives you the v3cm option to set your phone as, which will allow you to use MMS to upload content to your phone.

Enable Dial Up Networking (DUN) [GUIDE]			WORKS
2742	Bytes: 0000	Offset 6a	check bit 3
ahh yes use your razr to get an internet connection anywhere that you have reception! ahuh, that is right.

Remove Outside LCD Orange Background			WORKS
2742	Bytes: 0000	Offset 94	uncheck bit 7
Changes ugly orange background on the outside LCD when your phone is closed and the time is displayed. Makes it so that it displays your wallpaper instead. After performing the seem edit, restart your phone to activate the changes.

[FIX] for Custom graphic displayed when phone is open			WORKS
275a	Bytes: 0000	Offset 0027	uncheck bit 7 to display a custom graphic check bit 7 to display text instead of custom graphic
Although the method described on the change outside LCD guide should work, in some cases it might not. This is a fix for this special case scenarios. Note that in order for the custom graphic to be displayed it must be the correct resolution (98 pixels wide by 80 pixels high) and the path must be set in the 2771 seem correctly. Contributed by Totalhack

Enable Vibrate then Ring [GUIDE]			WORKS
2742	Bytes: 0000	Offset 7b	uncheck bit 3 // check bit 4
The following seem edit is almost a requirement to prevent volume resets after enabling vibrate then ring. This seem edit changes the ringer volume interface to original Motorola style where its 1-7 as opposed to low-high. A definate bonus and valuable addition!
2742	Bytes: 0000	Offset 7b	uncheck bit 2 // check bit 7

Change Carrier Banner [GUIDE]			WORKS
296a	Bytes: 24		Record: 0005
Allows you to change "Verizon Wireless" or otherwise to something of your liking. Make sure to take note of the different seem, bytes, and record.

Enable continuos backlight option			WORKS
2742	Bytes: 0000	Offset 0a	check bit 7
Enables Settings > Initial Setup > Backlight > Continuous Makes the backlight of the keypad stay on continuously. Not particularly recommended for battery conservation

Change or Find your Security Code			WORKS
2786	Bytes: 0000		Record: 1
Allows you to find or change the security that is used when accessing the programming menu (#0SETUP*). You can also change it by clicking on each invidual number (usually 000000 on the right seperated by periods) and typing in a new code (possibly only numbers)

Change or Find your Subsidy Code			WORKS
0055	Bytes: 0006		Record: 0001
The subsidy code is a code that some service providers use to keep phones on their network similar to GSM. This is required to program phones. Note: Verizon usually uses six zeros "000000" for their subsidy code.

Change your Bluetooth device name (IE: "Motorola Phone") NEW!			WORKS
2842	Bytes: 0000		Record: 0001
Change the bluetooth device name of your Razr. When you use a bluetooth dongle this is the name of the device that shows up on the bluetooth program. Provided by Casper

Change 1x icon to a D icon NEW!			WORKS
2742	Bytes: 0000	Offset 74	uncheck bit 7
Changes the 1x icon displayed in the top bar of the verizon razr to a D icon.

Adds "continental" ringtone			WORKS
2742	Bytes: 0000	Offset 38	check bit 1

Adds "classic" ringtone NEW!			WORKS
2742	Bytes: 0000	Offset 38	check bit 2

Adds "attention" ringtone NEW!			WORKS
2742	Bytes: 0000	Offset 38	check bit 3

Adds "moonlist haze" ringtone NEW!			WORKS
2742	Bytes: 0000	Offset 3b	check bit 0

Adds "siren" ringtone NEW!			WORKS
2742	Bytes: 0000	Offset 6	check bit 1

Enable Time & Date menu STEP 1 NEW!			WORKS
2742	Bytes: 0000	Offset 8d	check bit 6

Enable Time Auto-Update Menu Option STEP 2 NEW!			WORKS
2742	Bytes: 0000	Offset 0	check bit 0

Turn off Auto-Update of Time & Date STEP 3 NEW!			WORKS
2742	Bytes: 0000	Offset 55	uncheck bit 2

Enable Call Guard			WORKS
2742	Bytes: 0000	Offset 23	check bit 5

Enable file access with QPST NEW!			WORKS
2742	Bytes: 0000	Offset 5a	check bit 7

Enable Standard Motorola Startup Animation			WORKS
2742	Bytes: 0000	Offset 1d	check bit 3

Disable V-cast Shutdown Animation			WORKS
2742	Bytes: 0000	Offset 31	uncheck bit 0

MORE COMING SOON!

Want to submit a seem edit? Email it to contribute@hacktherazr.com

RELATED: How to perform a seem edit

Average: Select ratingPoorOkayGoodGreatAwesome

Your rating: None Average: 4.5 (8 votes)